How to Use Solar Garden Lights
Using Solar Garden Lights:
Solar lights need access to sunlight during the day in order to store up enough energy to work properly at night. When placing your solar lights, make sure they will have access to the sun. Before installing landscape lights, it is helpful to place a marker where each light will be located in order to ascertain if the lights will be properly balanced in your landscaping.
Install foundation stakes.
Push or hammer the foundation stakes for the lights into the ground. A rubber mallet is the best tool to use to hammer the stakes without damaging them. Make sure your foundation stakes are placed the same distance into the ground, or your lights will vary in height.
Attach light posts.
Some solar landscape lights are manufactured with the light component attached to the stake and others are separate. If your light component is separate from the post, then attach and secure the light component to the stake. When placing the light component in place, it is important that the solar panel on the light component is positioned to receive the required amount of daily sunlight to operate properly. Most solar lights require eight hours of direct sunlight in order to provide the maximum illumination through the night.
Position remote solar panels.
Attach remote solar panels to solar garden lights that will not receive the required amount of direct sunlight. The remote solar panel is connected to the solar light with a wire, and the small panel can be placed in a location that receives the appropriate amount of sunlight. Remote solar panels make it possible to illuminate shaded areas and to maintain balance in the design of your solar lights.